Swytch Brompton eBike Conversion Kit, Инструкция по эксплуатации

Страница: 18 / 35

34 35
6.2.1 Brompton Pedal Sensor Alignment
Fit the sensor onto the small frame tube of the Brompton.
Angle the sensor and add a spacer to move the sensor
within range. The spacer can be the supplied foam or a piece
of inner tube. Tighten the sensor screw to lock it in position
and add cable ties to secure it to the frame.
Alternative mounting location: Install the pedal sensor onto
the lower part of the frame. Remove the hinge mechanism
so that it can fit under the pedal sensor.
6.3 Brompton Peg
Follow the installation instructions for the standard kits.
Remove the existing peg from the Brompton frame and
attach the extended peg that is provided in the kit. Screw
the peg on by hand until it turns no further.
2
2
BROMPTON INCORRECT MOUNTING METHOD 1
Mounted onto incorrect tube. Magnets must pass from left
to right of the sensor.
BROMPTON INCORRECT MOUNTING METHOD 2
Mounted onto correct tube but gap is too big
1
1