Swytch Brompton eBike Conversion Kit, Инструкция по эксплуатации

Страница: 12 / 35

22 23
5.2.2 Universal Magnet Disk
When switching between the different sides, you will need to
unscrew the arm and reassemble it flipped around so that the
working surface of the magnet disk remains facing the same way.
Before starting, clean your pedal arm of any dirt and debris.
This will allow the pedal disk arm to fit securely to the surface.
Loosely cable tie the magnet disk arm to the inside of your
pedal arm in at least 2 points. Reposition the magnet disk
so that it is close to the sensor and aligned. Check that the
alignment is correct by rotating the pedal arm backwards
and watching for any movement. After this check, tighten
the cable ties completely.
1
Once aligned in position, tighten the screws to lock the disk
arm into place.
For small pedal arms, thread the cable ties through the holes
to improve the grip.
3
4
2