300143 RevA
Page 6 of 9
Options and Maintenance:
Occasional cleaning of the domes will ensure optimum light output. Take care when cleaning domes – although tough, polycarbonate
scratches easily. Clean the domes and base with soap and water or a lens polish using a soft cloth. Do not use solvents as they may
damage the polycarbonate. Do not subject the lightbar to high-pressure washers or automatic car washers.
Dome Removal and Installation
1. Remove the screws from the dome. Starting at one edge, pull the dome off.
2. Carefully lift the dome off the seal – choose a suitable location to temporarily store the dome so as to not scratch the surface.
3. When reinstalling, gently apply pressure around the dome taking care not to damage the seal. Replace the screws.
Warning LED Modules (79303, 79304, 79305, 79306, 79307)
The LED lightheads have been designed to ensure long service life using high performance
LEDs. The modules are low profile units that have a high intensity output with low current draw.
The LED lightheads can be mounted in the front, rear and corners of the lightbar.
Alley / Takedown / Worklight LED Modules (79300)
Alley / Takedown / Worklight LED Module can be mounted anywhere in the lightbar.
Stop / Tail / Turn LED Modules (79301)
Stop Tail Turn modules operate in conjunction with the vehicle tail, brake and direction indicator
lights. Kit includes a pair of modules, control circuit and cable.
