SWR M-Sens 2, Руководство пользователя

Страница: 12 / 27

12
6. Commissioning
AT the first commissioning of the M-Sens 2 it is necessary to calibrate the sensor.
Please consider:

Correct connection between sensor, C-box and evaluation unit

Correct installation of the sensor in respect to the wall thickness
In case of negative results in spite of consideration of the points as stated above, please con-
tact SWR.
Commissioning of the M-Sens 2
After the delivery the sensor is not calibrated to the product(s) , so each calibration and
parameterization has to be executed during the commissioning. Therefore it is necessary to
assign the measured moisture to the desired display and to the initial value. The menu func-
tions are very self-explanatory. In the following a short introduction to the menu overview:
Changed values are confirmed and saved by pushing the arrow button. To abandon the menu
without saving the changes push the C-button.
Starting the menu:
Entering the menu takes place by pushing 5 sec the in-
visible key lower right corner of the touch screen panel.
Basic function For the measurement and display of the moisture in %,
there 2-3 moisture measurement executed with known
and different moisture values. After having entered the
according moisture values by the panel, the system calcu-
lates the moisture in % on the basis of those measurement
values.
Hereby the basic function is initiated.
Adjustment
The menu point 1 “products” can be used for every of the
4 possible products.
Alarm Alarm can be determined for every product in the menu
point “measurement range”.
Current / Voltage output The definition of the initial values has to be done in the
Voltage menu point “analogue outputs”. The output value
(current/value) is assigned to the measurement range.
Standard MIN = 4 mA
MAX = 20 mA
The measurement range filter serves to the adjustment to
slower measuring devices or to continuous output at the
analogue output.
Digital inputs Under menu point 3 you define the digital inputs. Every
digital input can be used to start and stop the moisture
measurement.