SWL remote control for ICOM, Руководство по эксплуатации

Страница: 8 / 13

8
Copyright © 2003, 2004, 2005 by swl-remotes.com,
All rights reserved.
Enter Commands – Toggles/Selects radio features
Enter VFO/Memory mode.
2 Enter Attenuator on/off.
7 Enter AM; FM and CW (configurable).
8 Enter LSB, or USB modes.
9 Enter Wide, Normal, or Narrow filters.
0 x Enter Announce with speech synthesis. Only works with Speech Synthesis (UT-102)
option installed.
0 – All data.
1 – Frequency and S-Meter.
2 – Receive Mode.
Direct Enter Commands – Directly Selects radio features
8 x Enter Modes
1
– LSB
2 – USB
3
– AM
4
– CW
5 – RTTY
6 – FM
9 x Enter Filter Selection
1 – Wide
2 – Normal
3 – Narrow
Memory management
x x Last Select Memory Channel xx. Used for channels 10 – 99.
or
x Last Select Memory Channel x.
0 Last Memory to VFO. Frequency and mode are transferred from memory to VFO and
VFO mode is selected. This will only work when not scanning.
0 0 Last Recall last directly entered frequency and select VFO mode
1 0 0 Last Write VFO Frequency and mode to currently selected memory channel. This
will only work when not scanning and in the VFO mode.