211
PBX / Supplementary Services
131
8 PBX / Supplementary Services
R−button and supplementary services
Your telephone supports supplementary services provided by your telephone network provider,
such as brokering, call waiting and conference facilities. Press the
button to use these supple-
mentary services. Please contact your telephone network provider regarding which Recall (Flash)
time must be set to use the supplementary services. Also contact your telephone network provider
with regard to enabling supplementary services. The Recall time is set using the menu. Refer to
Page 118 for the sequence of menu option selections.
R−button on private branch exchanges
If the telephone is connected to a private branch exchange, functions such as transferring calls
and automatic call back can be used via the
button. Refer to the operating manual provided
with your private branch exchange as to which Recall (Flash) time must be set in order to use
these functions. The sales outlet where you purchased the exchange can provide information as to
whether the telephone will work properly with the exchange. The Recall time is set using the menu.
Refer to Page 118 for the sequence of menu option selections.
Number for an outside line (access code)
When using private branch exchanges, it is necessary to dial an access code to obtain the dialling
tone for an outside line. The number for an outside line is often 0" or 9". Dial this number first and
wait for the dialling tone. You can then dial the actual phone number.
If one−touch dialling buttons are to be used when the phone is connected to a pri-
vate branch exchange, please take this into consideration and enter the access
code before the actual phone number when programming the one−touch dialling
buttons.
It is also possible to program a dialling pause between the number for an outside
line and the actual phone number,
Section Dialling pause".
Dialling pause
When using private branch exchanges, it is necessary to dial an access code to obtain the dialling
tone for an outside line. When using some older private branch exchanges, it takes a little time be-
fore the dialling tone becomes audible. In the case of such private branch exchanges, a dialling
pause can be inserted after the number for an outside line in order to continue dialling directly with-
out having to wait for the dialling tone. The dialling pause is inserted by pressing and holding the
button for 3 seconds.
The actual phone number is dialled a certain time after the number for an outside line.
The dialling pause can also be entered for the phone numbers in the phone book.
