163
Starting Up
109
Inserting the batteries
The battery compartment is located on the rear side of the
handset. Open the battery compartment and insert the two re-
chargeable batteries of the type AAA NiMH, 1.2 V 500 mAh. Pay
attention to the correct polarity. Close the battery compartment.
Charging the batteries
Before the handset is used for the first time, in-
sert it in the base/charging station for
at least
8 hours.
When the handset is inserted in the base/charging station
properly, you will hear a confirmation signal. The handset
warms up during the charging process. This is normal and
does not represent a risk. Do not charge the handset with
charging units from other manufacturers. The current
battery
charge status
is indicated in the display:
Full
Empty
Setting the display language
Select the language required. Refer to Page 117 for the
sequence of menu option selections.
>
HS setting
>
Language
>...
There are 9 languages available for selection: German, French, Italian, English, Spanish, Portu-
guese, Dutch, Polish and Turkish.
Setting the date and time
The date and time are set using the menu;
Page 116.
Confirm each entry for year, month, day, hour and minute individually by pressing the
button.
Pay attention to the time format set;
Page 116. If the
12−hour
format is set, use the
/
buttons to select whether the time set is before midday (A) or after midday (P).
Private branch exchanges
The information on Page 131 explains how to install your telephone (base station) in a private
branch exchange.
Low−radiation operation (ECO mode)
The level of radiation is considerably lower than that of standard DECT cordless tele-
phones in Standby mode when the handset is in the base station. In talk mode, radi-
ation is reduced according to the distance between the handset and base station.
