Operating the Transmitter
56
Night light
The night light can be activated either continuously or automatically on detecting sounds from approx.
50 dB.
y
Set the NIGHTLIGHT switch (30) to “ON”. The night light is switched on continuously.
y
Set the NIGHTLIGHT switch (30) to “OFF”. The night light is switched off.
y
Set the NIGHTLIGHT switch (30) to “AUTO”. The night light is automatically switched on after detect-
ing a noise level in excess of approx. 50 dB.
Turning the camera image horizontal
You can turn the image transmitted by the camera to a horizontal position by turning the lens rotating
ring (20) clockwise or counterclockwise.
ECO modus
The transmitter is equipped with an ECO mode which can be very useful when operating using batter-
ies. It reduces the transmission power, thereby increasing the service life of the batteries. Activate
ECO mode by setting the ECO mode switch (31) to "LO".
Attention: The operating range of the transmitter and receiver is reduced when ECO mode
is active. This can lead to interference in the transmission. In such cases, select a new loca-
tion for the devices or deactivate ECO mode.
Changing the loudspeaker volume
You can adjust the volume of the transmitter to one of three settings using the volume control (28).
