Operating the Receiver
58
Starting voice transmission
You can start a voice transmission to the transmitter from the receiver. Your voice is then played via
the loudspeaker in the transmitter.
Press and hold the Talk button (5) and speak into the microphone (7) in the receiver. Transmission is
ended when you release the Talk button (5).
When the Talk button (5) is pressed, any sound transmission from the transmitter to the re-
ceiver is interrupted.
Melodies
You can send melodies via the receiver to be played on the transmitter. There are 3 different melodies
for selection.
Press the Melody button (3). The first melody is played. Press the Melody button (3) again to play the
next melody.
Selecting a channel
The channel selection is preset to channel 1 at the factory. The receiver in the BCF900 is capable of
supporting 4 transmitters at 4 different locations. This is done by using the CHANNEL button (10).
(Refer to Page 9 for information on using several transmitters.)
Power LED / Battery charge status LED
The Power LED (1) (green) also serves as the battery charge status LED. It flashes orange when the
battery needs to be charged.
