SWITCH MADE LS1911B, Руководство пользователя

Страница: 9 / 13

9
Fix the pendant cable at the mounting position
10
Connect the strip wire in the profile with the output line of the power supply 11 Adjust height of the fixture 12
Completed
Fix the end caps (with and without hole) on the profile with screws
13
Please make sure the pendant cable is firmly fixed
LED-
LED+
DIM-
DIM+
Driver
GND
AC-N
AC-L
Connect to DIM
-
+
LED
When smoke or the smell of burning is found from the fixture, please immediately turn
it off
If assembling is required, please read the detailed profile assembling steps on P08
and do it in the correct way
For an end cap without hole, wire goes out from the profile bottom, while it goes out
from an end cap with an hole of
φ 6mm
End cap
End cap with hole
w w w . s w i t c h - m a d e . c o m
SWITCH MADE
USER MANUAL