SWIT Electronics S-1273F, Руководство пользователя

Страница: 19 / 22

13. Color Measurement
*1 Camera Log conversion
When shooting with Log mode of the camera, you can select the corresponding Log conversion
LUT, to convert the log mode video to standard ITU Rec.709 mode to monitor. A”User-Log” is
provided for user defined LUT converting to Rec.709.
*2 Color Measurement enable
Before re-calibrate the monitor and start to measure the monitor display colors, please turn the
“Color Measurement“ on. And please turn the “Color Measurement” off when measurement
finished and return to normal monitoring. It will turn off automatically when new cubes are imported
or monitor restarted.
*3 Import re-calibrated cube or user log cubes
(1) Calibrate the monitor by color meters and 3DLUT calibrating software, select 17x17x17, 6500K,
Gamma 2.4 to calibrate, and get a corret cube file.(Konica Minolta CA-310 color meter and
Spectracal CalMAN software are recommanded for accurate calibration)
(2) Rename the re-calibrated cube as “3DLut.cube” (attention to the cap lettters), and copy into USB
stick root directory.
(3) Insert the USB stick onto monitor USB port on the rear panel, select “Import” - “3DLut.cube” - “YES”
to import the new cube.
(4) You can change all the default camera log LUTs , User logs, and 1DLut colors by USB importing
new cube file at the same file name.
*4 Reset to factory cubes
For any wrong cubes imported that caused wrong display colors, you can reset the cubes to factory
cubes here.
14.OSD
15. Key Inhibit
If the “Key Inhibit” is “On”, there is no response when all the buttons expert ” MENU/ENTER” are
pressed, the sreen will be displayed as ” Key Inhibit”.
User can set “Key Inhibit” under “key Inhibit” submenu to “Off” to recover the functions of all buttons.