SWIT Electronics S-1073F, Руководство пользователя

Страница: 9 / 21

9
⑻
. Waveform
User can set function Keys F1
～
F4 or GPI pins as “Waveform” to turn on or off this function.
The relevant parameters like WFM position, WFM color and WFM blending, etc can be changed
under “Waveform” submenu
·
Zoom-in and mapping
Set “Zoom-in” to function keys, and enable zoom-in mode, the OSD displays as above.
1
、
Zoom-in steps operation
Scroll the Menu key up and down, to quick adjust zoom-in steps among: 1.2x, 1.5x, 1.8x, 2.0x,
2.4x, 2.6x, 2.8x and 3.0x. The zoom-in indication window is displayed on bottom right of the screen.
2
、
Left and Right mapping
Press Menu key, the button is highlighted. Scroll the Menu key up and down to move the video
left and right.
3
、
video left and right.
Press Menu key again, the button is highlighted. Scroll the Menu key up and down to move the
video up and down.
4
、
Peaking precision adjust
Press Menu key again, the peaking precision number is highlighted. S croll the Menu key up and
down to adjust the peaking focus assist precision from 0-9.
5
、
Mapping indication window
Under zoom-in mode, the mapping indication window is displayed on bottom right of the screen,
and indicates the zoom-in rate, up/down/left/right position.
Introduction of audio and video functions

16-ch embedded audio meters
Under 3G/HD/SD SDI, it displays 16 channels embedded audio meters. Under HDMI, it displays 8
channels embedded audio meters. Under CVBS, it displays 2 channels embedded audio meters.
The audio meter is green, and will turn yellow when audio exceeds -20dB, and turn red when
audio exceeds -9dB.

Audio alarm
If the embedded audio value is too low or no embedded audio, it will display “MUTE” or
“UNLOCKED” in the audio bar.

Time code
（
SDI
）
Under SDI input, it can display the SMPTE time code (VITC1, VITC2 or LTC) on the top of the
screen, which is used extensively for synchronization, and for logging and identifying material in