SWIT Electronics S-1073F, Руководство пользователя

Страница: 17 / 21

17
12. System
*1 Source Scan
When set to “Yes”, after turn on the monitor, the signal will be inspected and follow the sequence
of “SDI→HDMI→CVBS”
For example: if channel is selected to SDI, SDI-IN has no input, and HDMI has input. When turn
on the monitor, after automatic inspection, SDI has no recognized signal, and HDMI has recognized
signal, then the input signal will be HDMI.
When set to “No”, update model will not be supported.
*2 Logo
When powered on, the screen will display SWIT logo.
*3.*4 Update Driver/ Kernel
⑴
Open the power supply, plug the U disk with upgrading programma into the USB port on the
rear of the monitor
；
⑵
Press “MENU” rotary knob, open the main menu, enter the “system” submenu, select
“Driver/Kernel”
；
⑶
Set the parameter to “Yes”, and press “MENU” rotary knob to begin upgrading
；
⑷
While upgrading, there will be a prograss bar dispaying on the screen (Note: Do not power off
when upgrading
） ；
⑸
After upgraded, the monitor will automatically reboot.