SWIT Electronics S-1073F, Руководство пользователя

Страница: 8 / 21

8
SDI-OUT: SDI output (BNC connector)
When the input is SDI, loop output the signal connected to SDI-IN
When the input is HDMI, output HDMI converted to SDI signal
Note: when the input is HDMI, SDI-OUT does not support SD-SDI signal
HDMI-IN: HDMI signal input, HDMI-A interface.
HDMI-OUT: HDMI signal output, HDMI-A interface.
CVBS-IN: CVBS input (BNC connector)
⑼ U S B
Socket
⑽
AUDIO IN: 3.5mm analog audio input (CVBS)
AUDIO OUT: 3.5mm audio output, to monitor SDI embedded audio, HDMI and analog audio output
· Screen display
⑴
. Timecode
（
SDI
）
Under SDI input, it can display Timecode. If no Timecode information is detected, it will be
displayed as “TC: UNLOCKED”.
User can set function keys F1
～
F4 as “Timecode” to turn on or off this function
⑵
. UMD
Display the source title. Set up the UMD under ‘UMD” submenu.
⑶
. AFD
（
SDI
）
User can set function keys F1
～
F4 as “AFD” to turn on or off this function. If no relevant
information is detected, it will be displayed as “AFD: UNLOCKED”.
⑷
. Soft Tally
When connected with TALLY control devices and set TALLY port in GPI, the screen will display
soft TALLY signal, flashing in Red, Green or Yellow. Refer to “Main Menu
—
5. GPI”.
⑸
. Audio
Monitor the audio information. User can set function Keys F1
～
F4 as “Audio” to turn on or off this
function
The relevant parameters like position, audio channels and blending, etc can be changed under
“Audio” submenu.
⑹
. Histogram
User can set function Keys F1
～
F4 as “Histogram” to turn on or off this function.
⑺
. Vector
User can set function Keys F1
～
F4 or GPI pins as “Vector” to turn on or off this function.
The relevant parameters like Vector position, Vector color and Vector blending, etc. can be
changed under “Vector” submenu.