Swisscom Aton CL311, Руководство пользователя

Страница: 66 / 72

64
20405097en
_ba_a0
PBX access
Compatibility
Your telephone is designed for use in the analogue telephone network and can be operated
on a PBX that supports DTMF dialling and flash signalling. Contact your network operator
for further information.
Access Code
You may need to enter an access code (e.g. 0) to allow the public exchange to assign an
external line for external calls or for calling back numbers in the calls list.
Entering the Access Code
Procedure:
1. Press the softkey under MENU . Scroll to PBX in the SETTINGS menu and press OK to
confirm.
2. Enter the access code.
Note • After having programmed an access code you do not have to enter it again
in a directory entry. However, if you dial off-hook or in call preparation you
still have to enter the access code manually.
• To give the exchange sufficient time to assign a public line, you may
need to program a “pause” after the access code by pressing and holding
down
.
• For further information, refer to your PBX operating instructions.
Incoming Code on/off
Some exchanges automatically insert the access code. Make the necessary setting (on or
off) in the menu
SETTINGS , PBX , FUNCTIONS .
0