Swisscom Aton CL311, Руководство пользователя

Страница: 13 / 72

11
20405097en
_ba_a0
Repeater
You can use a repeater to extend the range and receiving power of your base station.
The repeater must first be registered and activated on the base station. (Your telephone
is delivered with the default setting “off”).
Note For settings refer to chapter “Settings, Repeater”.
Setting up the base station
➭ Do not expose the base station to direct sunlight.
➭ Protect the base station against moisture. Do not position the base station in rooms
exposed to condensation, corrosive steam or excessive dust. Condensation can be pre-
sent in basements, garages, conservatories or sheds.
➭ The ambient temperature must be between 5 °C and 40 °C.
Position the base station in a clean, dry and well-aired location. Choose a place which is
stable, level, and not subject to vibrations. To avoid mutual interference, do not position
the base station in the immediate vicinity of electronic equipment such as hi-fi systems,
office equipment or microwave ovens. Avoid positioning the telephone near heat sources
such as heating elements or near obstacles such as metal doors, thick walls, niches and
cupboards.
There is no mains switch on the base station. For this reason the socket to which it is
connected must be easy to access.
Listening protection
When you are on the telephone, the base station and handset are connected to each
other over a radio link. The base station handles switching between the telephone net-
work and the handset. To ensure that no-one can eavesdrop or telephone at your cost,
the base station and handset exchange codes. If the codes do not match, the connection
with third-party handsets cannot be set up.
Setting up the telephone