26
20405097en
_ba_a0
Telephoning
Sending SMS messages from the redial list*
1. Press the softkey under
. Use
to scroll through the list to find the entry you are
seeking, and press the softkey under
OPTIONS
,
WRITE MESSAGE
.
2. Write and send your SMS message.
Automatic redial
When the called number is busy, the automatic redial function can be activated from
the “Options” menu. The interval as well as the number of redials can be set in the
“Options” menu. Once automatic redial is activated, the phone emits an alert (for
approx. 30 seconds) after a set interval.
The user then has three options:
– Automatic redial can be deactivated using the left softkey (OFF). This cancels dialling
and deactivates the ringtone.
– If the right softkey (YES) or the talk key is pressed, the set number is automatically
dialled and at the same time automatic redial is deactivated. If the called number is still
busy, automatic redial must be re-activated via the "Options" menu.
– If, while the alert is emitted, no key is pressed or the “End call” key is pressed, redial
remains activated and the next reminder signal is emitted after the set interval. This is
repeated for as many times as redials are programmed.
Note
The interval therefore applies only to option 3.
Group call (paging)
You can activate a group call to locate a mislaid handset.
1. Press
on the base station. The mislaid handset rings.
2. Press
again to end the ringing signal or press
on the handset or the
softkey under “Reject”.
* Function dependent on network operator.
Contact your network operator to find out whether this service is supported.
Содержание Aton CL311
Страница 1: ...Aton CL311 CLT311 User manual...
Страница 70: ...68 20405097en_ba_a0...
Страница 71: ......
Страница 72: ...en 01 2009 SV 20405097en_ba_a0...