7
First steps
Gigaset S68H / SWZ PTT en / A31008-M1956-F151-2-2X19 / main.fm / 22.4.08
Ve
rs
ion 4,
16
.09.
2005
Registration
Before you can use your handset you must
register it to a base station. It can be regis-
tered to a maximum of four base stations.
The actual registration procedure will
depend on the type of base station.
Automatic registration of the handset to an
Aton CL308/Aton CLT308 base station
Precondition
: The handset must not yet
have been registered to a base station.
The handset is automatically registered to
the Aton CL308/CLT308 base station.
¤
Place the handset in the base station
with its
display facing forward
.
Registration can take up to 5 minutes.
During this process,
Regstr.Procedure
appears in the display and the name of the
base station flashes, e.g.
Base 1
. When the
handset has registered, its screen displays
its internal number, e.g.
INT 2
for internal
number 2. The handset is assigned the
lowest available internal number (1–6).
If all internal numbers 1–6 have been
assigned, number 6 is overwritten, pro-
vided the handset with the internal
number 6 is in idle status.
Manual registration of the handset
If the handset does not activate automati-
cally when the batteries are fitted, you
must first charge the batteries.
You must activate manual registration of
the handset on both the handset and the
base station.
Once it has been registered, the handset
returns to idle status. The handset's inter-
nal number appears in the display,
e.g.
INT 1
. If it does not appear, repeat
the procedure.
On the handset
v
¢
Ð
¢
Handset
¢
Register H/Set
s
Select base station, e.g.
Base 1
and press
§OK§
.
~
Enter the system PIN of the
base station (the default is
0000) and press
§OK§
. You will,
for example, see
Base
1
flash-
ing in the display.
On the base station
Within 60 sec. press and
hold
the registra-
tion/paging key on the base station
(approx. 3 sec.).
Headset socket
You can connect various headset types
(with 2.5 mm jack connector), including:
HAMA Plantronics M40, MX100 and
MX150 as well as the enclosed headset.
Please note:
– Automatic registration is not possible when
the base station to which you wish to regis-
ter the handset is being used to make a call.
– Each key press interrupts the automatic
registration.
– If automatic registration does not work,
you will have to register the handset manu-
ally.
