4
Information on using the phone
• After you end an input/setting you will see „stored“ in the display. Wait until the
word disappears before requesting further functions or ending programming.
• If you want to alter several functions protected by a PIN one after the other,
you only need to enter the PIN for the first function (exceptions: reset/restore
the delivery status).
• When you program a telephone number under a memory location, you can
enter manual dialling pauses via the redial key. In the display, a pause is
indicated by the symbol „P“ in the upper display line. If you made a mistake
when entering the telephone number, just use the C-key to erase it.
• If you have stored an Exchange Identification Code you have to enter this in
front of the phone numbers that you want to enter in a memory (phone
numbers for speed dialling, abbreviated dialling, assistance call function and
dialling restriction).
Symbols of the display
Automatic redialling active.
Redialling active.
There is an unanswered call. The transferred telephone
number can be displayed.
A programming step is executed.
Listening-in or hands-free mode is active.
Ringer is switched off.
