24
Assistance call operation mode
Enter PIN-code (factory pre-set: 0000).
Enter assistance call number and confirm with the
key.
You can enter a further code of another function or press the
C-key to exit the programming menu („P“ disappears in the
display).
Remarks:
• You can delete an entered assistance call number during the programming
process by pressing C-key.
• After an assistance call is released, the telephone dials the numbers up to 12
times automatically. If 3 assistance numbers are stored, this numbers will be
dialled one after another. This sequence will be repeated up to 4 times. If 2
assistance numbers are stored, these will be dialled one after another. This
sequence will be repeated up to 6 times. If only one assistance number is
stored, this number will be dialled up to 12 times. If all dialling attempts are
unsuccessful, the telephone sends three short tones and terminates the
assistance call.
• Each programmed assistance call number will be called 90 sec. Directly after
this, the next number will be dialled.
• Only if one assistance call number is programmed, you can hardly notice the
new dialling after 90 seconds, because the dialling procedure runs off very
fast.
Activate/deactivate assistance call mode
Please be aware, that the assistance numbers must be stored before you
activate the assistance call mode.
Press the R-key and the redial key at the same time. (The
„P“ for „Programming-mode“ appears in the display.)
Select the function „Switch assist.call on“ using the arrow
keys and confirm with the
key.
