9
Initial operation
Insert name plates
Write on the speed dialling name plate
Write the names of your speed dialling partners on the fields of the name plate
(see fig. on the left).
Insert the name plate
Lay the name plate into the slot. Slide the plastic cover into the upper gap (see
fig. on the right), curve it and push the other end of the cover into the other gap.
Remove plastic cover: Seize with the fingernail or a suitable tool under the top
margin of the cover and pull these from the telephone away, until it jumps out of
the gaps.
Pre-printed inlay plate and plastic cover for „police/fire brigade/ambulance“
Write the telephone numbers of police/fire service/ambulance in the lines of the
plate. Insert the plate in the recess on the left side of the housing.
Attach plastic cover: Push the side with the longer taps (without the centric
groove) into the lower gaps. Press the cover in slightly, so that the two shorter
taps engage into the gaps above.
