31
RealTrace-Phone
Version 1.03 of 14 October 2015
This software is intended for distributors and veterinarians. It has been developed to allow the
reading and writing of data on the "chips" injected into animals, in accordance with ISO
Standard 11784/85 and 14223.
The data to write, in this case one or two telephone numbers, is saved into memory blocks not
used by the “chip”, the ISO identification number (15 digits) having been written and locked by
the manufacturer. It is therefore imperative that some blocks are available, and therefore open,
so the procedure of writing using the V8BT reader can be correctly achieved.
This additional information can be written to the 'chip' in the needle, through the cap,
either
before injection of the transponder into the animal or in the animal after injection.
We recommend that you write the number(s) in the needle, and then by reading, check the
accuracy of what has been written and then inject the chip to the animal.
When reading from a 'chip' that contains no phone numbers the reader emits a single “beep”
when it has found the chip.
If the "chip" contains or has contained telephone numbers, the reader emits two “beeps”.
In the event that the owner of the animal should change phone number, it will be possible to
update the numbers by overwriting the "chip" implanted in the animal. The write and read
distance for additional data on the chip by the V8BT reader is about 7 to 9 centimetres that is
slightly less than the distance for reading the ISO number (10 to 12cm).
The PC program allows the entry of two 16-digit sequences, i.e. two phone numbers. We
advise to register these numbers indicating the ISO code of the country.
Example:
0033134618980
(
do not put spaces between numbers)
The choice of telephone numbers is left to the discretion of the user: the number of the owner of
the animal, of the veterinary clinic, of an association, etc.
These numbers can be changed by the veterinarian as many times as necessary.
What is the essential equipment?
1/ The implanters, needles, and "chips" are the same as those currently used by veterinarians.
“Chips” may be standard size: that is 2 x 12mm or the smaller 1.4 x 8.5 mm format that is
currently gaining on the market.
However, whatever format is selected, the "chips" delivered by manufacturers must be
programmed with the
locked ISO identification number
, with blocks 3/9/10/11/12/13 open.
These currently unused blocks will be used to save the phone numbers and signature.
2/ A conventional PC running XP, Windows 7 or Windows 8. The PC must have a USB
connection and possibly Bluetooth connection.
3/ An RT100 PetScan V8BT reader with its USB cable.
4/ Realtrace-Phone software, which is provided free of charge.
Содержание RT100V8BT
