AVANCER REMOTE
USAGE INSTRUCTIONS
— 8 —
Hold the “STOP” button for more than 3 seconds to enter energy saving mode. The
indicator light will be off and the energy saving light will be on. Hold the “STOP” button for
another 3 seconds to exit energy saving mode. The indicator light will be on and the
energy saving light will be off.
During energy saving mode, the seat temperature will be at level 1.
Energy Saver
The automatic function default settings are on the middle level for water volume, nozzle
position, water temperature, air temperature and seat temperature.
Quickly pressing the “ ” or the “ ” button will activate automatic male rear wash and female
bidet wash.
You can custom set the water volume, nozzle position, water temperature and air temperature.
After the setting is complete, hold the automatic user setting button for 3 seconds to save the
settings. Your settings will be saved for the next time you press the programmed button. You
are able to set the automatic function to enable cleaning and drying.
The automatic function mode will be off if you press another button during operation.
Auto Function
NOTE:
If user sits on the seat, the energy saver mode is paused and enters into the
function mode, the seat starts to heat immediately. The energy saver mode restores
after user leaves.
Massage cleaning 30s
Massage cleaning 30s
Automatic stop
Auto rear cleaning
Rear cleaning 20s
Dry 180s
Rear cleaning 40s
Auto front cleaning
Front cleaning 20s
Front cleaning 40s
Dry 180s
Automatic stop
