楰
ҟ
GENERAL RECOMMENDATIONS
• Always thoroughly clean the spreader after
every use.
• Use fresh clean water to clean.
• Allow to completely dry before using after
cleaning.
21
CLEANING GUIDELINES
CLEANING THE HOPPER
• Empty all bulk material left in the Hopper.
• Remove the Removable Pin from the top link
located next the Flow Control Handle . This will
Allow the Hopper to lower and become easier
to access for cleaning.
See FIGURE 22.1 & 22.2
• Using clean water and a rag. Thoroughly clean
the inside of the Hopper and all Components. It
may be necessary to remove the agitator to
clean particles that may be trapped
underneath.
• Also thoroughly clean the slide plates, spinner
disc, and gearbox.
• Check the internal plastic sealing washer (Part
# 21967) for damage and clean all debris that
may have gotten under the washer. See page 31
for washer detail.
• Once the Hopper is clean, if cleaned with water,
make sure it is completely dry before adding
material. Wet material can result in poor
function and corrosion.
FIGURE 22.1
FIGURE 22.2
WARNING
: PROPER CLEANING IS ONE OF THE MOST
IMPORTANT STEPS IN CARING FOR YOUR SPREADER. SOME
MATERIALS CAN BE HIGHLY CORROSIVE AND
WILL
CAUSE
DAMAGE TO SPREADER COMPONENTS IF NOT CLEANED !
Содержание HOBBY FARM PRO 22000
Страница 34: ...34 When ordering replacement parts USE PAINT CODE TK BLACK NOTES...
Страница 35: ...35 When ordering replacement parts USE PAINT CODE TK BLACK NOTES...
Страница 36: ...36...
Страница 37: ...37...
