ASSEMBLY DIRECTIONS
1.
Check that all parts are present before
beginning assembly.
See page 8
2.
Uncrate the Spreader using the directions
on
page 9
.
3.
Next, locate the Hitch Coupler Bar pre-
assembly (1). Notice there are multiple
empty holes. This allows for you to locate
the spreader distance to the tow vehicle so
the control handle is reachable.
4.
After deciding which mounting holes best
suits your tow vehicle, assemble the hitch
components.
5.
Place the Hitch Bar (1) in between the Top
Link Brackets (2) and Hitch arms as Shown
in
FIGURE 10.2
. The Plates (2) go in
between the hitch arms and the Hitch Tube.
See
FIGURE 10.3
for an assembled hitch
image if needed.
10
FIGURE 10.1
ASSEMBLY DIRECTIONS
ASSEMBLY DIRECTIONS CONTINUED
6.
Next using one 5/8”-11 Bolt (7) & one
5/8”-11 Nylon Lock Nut (9), assemble
the bottom section of the top link (3)
between the top link Brackets
previously installed per
Figure 10.2
.
Tighten until at least one thread
protrudes from the backside of the
Nylon Nut.
7.
Lastly connect the Top Link to the top of
the Spreader Frame using the
Removable ½” Pin (4) and hair pin.
8.
After fully Assembled, ensure all
hardware has been tightened.
9.
The Spreader is now fully assembled.
Follow the guidelines in this manual to
ensure the control linkages are
calibrated and all other hardware is
secure.
Wrench/Socket
Qty. Size
(2) 3/4”
(2) 15/16”
Tools Required:
Item numbers shown are referencing the
assembly parts list on PAGE 8.
FIGURE 10.3
FIGURE 10.2
Содержание HOBBY FARM PRO 22000
Страница 34: ...34 When ordering replacement parts USE PAINT CODE TK BLACK NOTES...
Страница 35: ...35 When ordering replacement parts USE PAINT CODE TK BLACK NOTES...
Страница 36: ...36...
Страница 37: ...37...
