Swing-N-Slide PB 8205, Руководство по сборке

Страница: 41 / 48

41
PB 8228 - PB 8205 Assembly Instructions
41
Fig. 44
Fig. 44a
Fig. 44c
5/4" x 4" x 17"
x2
Use truss head screws
to secure slide to deck.
(4)
1'' Truss Screw
DD. Slide Installation.
1. Assemble two piece slide by bolting together at 11 locations using
(1) 5/16'' x 3/4'' head bolt,
(1) 5-16'' loc-nut and
(2) 5/16'' flat washers at each location.
See
(Fig. 44a) and (Fig. 44b) for proper hardware application.
2. Position slide to determine proper location for stake.
3. Drive wood stake into ground leaving 2'' exposed.
4. Secure the slide bottom to the stake using (2) 1-1/4'' deck screws. (Fig. 44c) .
5.
Attach slide to unit as shown in
(Fig. 44)
.
2'' Above Ground
(2)
1-1/4'' screws
per joint
1 2
3
4
5
6
7
8
9
10
11
Fig. 44b