MAINTENANCE
134
SPARE PARTS
Spare parts are safety critical parts! For this
reason when fitting spare parts in our products
we recommend the use of original AL-KO
parts or those parts that we have explicitly
approved. The reliability, safety and suitability
of parts designed especially for our products,
has been determined using a special test
procedure. In spite of constantly monitoring
the market we are unable to assess or vouch
for other products.
If repair work or servicing is required, AL-KO
have a large network of AL-KO service stations
throughout Europe. To establish the correct
spare parts required you should always
quote the model and type of overrun device
in question along with the ETI No. which is
stamped into the overrun device housing. The
ETI number for the Euro Overrun can be found
on the handbrake lever.
EURO-OVERRUN DEVICES FITTED WITH
AK160 COUPLING HEAD
Connect caravan electric plug controlling lights
and indicators etc. into towing vehicle socket.
Wind the jockey wheel up fully and clamp
securely in position, ensuring that it does
not foul the brake rod or breakaway cable.
Remove wheel chocks if fitted and stow safely.
Caution:
Failure to comply with this could
result in the brakes overheating.
Euro Handbrake
Ensure the handbrake is fully applied to ensure
that the wheel brakes will be automatically
re-applied should the vehicle start to roll
backwards.
Caution:
If the handbrake is not fully applied
as detailed above, there is a danger that the
caravan could roll backwards.
To release
Press the handbrake down until it is parallel
with the fairing cover to ensure that the brake
is correctly disengaged.
COMPLEMENTARY PRODUCTS
AL-KO Security Device
AL-KO Security Devices provide a substantial
deterrent against the theft of the caravan or
trailer. They lock over the coupling handle,
preventing unauthorised uncoupling.
Fitting the supplied Safety Ball into the
coupling head when the Security Device is
applied, prevents the caravan or trailer from
being coupled to another vehicle.
The Security Device is manufactured from high
density steel and is TUV approved.
Visit
for more information.
Extended neck towball
Designed especially for use with the AL-KO
AKS stabilisers the Extended Neck Towball has
an extended machined neck to allow correct
stabiliser articulation and clearances.
AK160 COUPLING
Содержание Basecamp 2018
