background image

4

F 50B

D

oc: 101518-

GB  1838

 

 

 

  F 50B

F 50B

Sound pressure level 
at the operator's                   88 dB (A)

                     

ear, LpA 

 

Permissible sound
power level, L 

WA                           

105 dB (A)                   

Guaranteed sound
power level, L 

WA                            

103 dB (A)                 

STANDARDS

Noise

Measurement according to the standard EN 500-4 Rev.1: 

1998, Annex C:

Measuring accuracy ± 0.5dB (A) in 95% of measurements.

Under the terms of Directive 2000/14 /EC, Annex VI, the 

following are stated:

Since the sound pressure level in the operator’s ears exceeds

80 dB (A), use ear protection when operating!

Hand/arm vibration

Vibration acceleration has been measured according to the 

ISO 5349 standard when driving on gravel substrates. The 

measured values have been converted to maximum daily 

exposure time during regular use. Further information is 

available in the work environment regulations AFS 2005:15 

on vibration, valid from 1 July 2005.

Measuring accuracy ± 0.3 m/s 2 in 95% of measurements.

Hand/arm

vibrations, m/s

2

                      4.0                             

Maximum daily 

exposure time                      3.1 hours                        

SAFETY INSTRUCTIONS

•  The operator must be informed of the manufacturer's 

safety and operating instructions before using the machine.

•  The machine may be used indoors and outdoors.

•  The machine may not be used if protection and safety 

devices are missing or inoperative.

•  The operator must not leave the machine unattended 

when the engine is running. When the vibrator is switched 

on,  the operator must be able to check the machine's motion 

using the control handle and start/stop switch. 

 

The machine may be operated only by a trained operator.

•  When performing servicing or other procedures to  

the machine, always switch off the engine.

•  Before lifting, check that the lifting device or its   

attachment is not damaged and that the rubber dampers on 

the bottom plate are undamaged and tightened.

•  When installing, safety against tipping must be observed.  

The machine must not lean more than 20º. (FR 85 18°)

•  The operator must use ear protection when working with 

the machine.

•  The operator must ensure that no unauthorised person is 

present in the immediate vicinity of the machine.

•    Always wear persoal protective equipment such as sturdy                                                                                                                                         

non-slip boots, ear protection and approved eye protection.
                                                                                           
•    Do not use the machine in environments with a potential                                                                                                                                        

fire or explosion hazard. 

•    Never use the machine if you are tired, have been drink-

ing alcohol or under medication that may affect your vision, 

your judgement or your hand-eye coordination. 

•    Never use a machine that has in any way changed                                                                                                                                          

from the original version. 

Содержание F 50B

















Отзывы: