8
F 50B
D
oc: 101518-
GB 1838
DAILY SUPERVISION
Checking charge
Make sure that the battery is charged before working with the
machine.
NOTE: Only original charger may be used.
The battery pack can be removed easily from the machine and
charged separately. With an extra charged battery, you can
ensure additional operating time with the machine
Make sure the charger cord is disconnected before working
with the machine.
Charging
1. Check if your local area network is consistent with the
charger input voltage of 230V.
Connect the charger to the wall socket. The charger's On/Off
button should be in position 1 (ON)
2. LED1 Red confirms that the AC power is on and LED 2
Green confirms that the charger is properly connected.
3. Connect the connector to the battery terminal (connection)
LED1 Red confirms that the charger is charging, LED 2 Green
confirms that the battery is fully charged.
Precautions, Chargers
The sparking phenomenon is normal when connected to the battery
due to high current.
The charger is designed to charge only LITHIUM batteries.
Avoid charging incorrect types of batteries.
The battery may break if LED 2 does not switch to green after
long-term charging.
Make sure the charger is used in a well-ventilated and dry
environment.
The charger is designed with the aluminium housing as a heat
sink. Do not cover it to avoid overheating or overheating during
charging
Please pay attention to the DC connection:
Brown + Positive terminal, Blue - Negative terminal.
Do not disassemble the charger. Always use qualified service
personnel when service or repair work is required.
BATTERY PACK
CHARGER
Содержание F 50B
