USER GUIDE
Ɩ
EM8500 SERIES
Copyright
2016, EM Microelectronic-Marin SA
EMDVK8500-MN01, Version 2.0, 5-Jul-16
3
420005-A01, 3.0
3
CONTENT DESCRIPTION
The EMDVK8500 kit consists of:
Ɩ
1x Base board
Ɩ
1x Daughter board
Ɩ
1x Application board
Ɩ
1x Memory stick - USB dongle 4GB containing EM8500 DevExplorer software installation setup
Ɩ
1x Cable - USB cable type A to B
Ɩ
1x Power supply - AC/DC +5V plug
Ɩ
1x Solar cell
AC/DC plug +5V
Addi5V supply
USB cable
PC to Base board cable
USB dongle
Install Setup
USB stick
Application board
Application PCB
Base board
PC Control board
Daughter board
8500 board
Solar cell
Figure 3-1 EMDVK8500 deliverables
Note: In this document the reference name EM8500 refers to the EM8500 series (harvesting family device). In some
particular description the part number is used
(e.g EM8500, EM8502,…).
4
INSTALLATION AND SOFTWARE/FIRMWARE UPDATE
4.1
INITIAL INSTALLATION
To install the software EM8500 DevExplorer, an installation setup file is available on the memory stick.
Simply
connect the memory stick
to the Base board (USB MEM connector) and
connect the Base board
(USB
Host) to the PC through the USB cable.
Skip
and
close
the installation driver window that may pop-up.
Open
an
explorer
window
