Swarts Tools SWB1705, Инструкция пользователя

Страница: 5 / 14

SAFETY INSTRUCTIONS:
SWB1705
03
14. USE EYE PROTECTION. Use a full-face mask if the work you’re doing produces metal filings,
dust or wood chips. Goggles are acceptable in other situations. Wear a clean dust mask if the
work involves creating a lot of fine or course dust.
15. SECURE WORK. Use clamps or a vise to hold the work piece. It’s safer than using your hands
and it frees both hands to operate the tool.
16. DON’T OVERREACH. Keep proper footing and balance at all times. Do not reach over or
across machines that are running.
17. MAINTAIN TOOLS WITH CARE. Keep tools sharp and clean for better and safer performance.
Follow instructions for lubricating and changing accessories. For safe performance keep
handles dry, clean and free from oil and grease.
18. AVOID UNINTENTIONAL STARTING. Be sure the switch is in the OFF position before
plugging in.
19. ALWAYS CHECK AND MAKE SURE TO REMOVE ANY ADJUSTING KEYS OR WRENCHES
before turning the tool on. Left attached, these parts can fly off a moving part and result in
personal injury.
20. DO NOT USE THE TOOL IF IT CANNOT BE SWITCHED ON OR OFF. Have your tool
repaired before using it.
21. DISCONNECT THE PLUG FROM MAKING ADJUSTMENTS. Changing attachments or
accessories can be dangerous if the tool could accidentally start.
22. STAY ALERT. Watch what you are doing and use common sense. Don’t operate any tool when
you are tired.
23. CHECK FOR DAMAGED PARTS. Before using this tool, any part that is damaged should be
carefully checked to determine that it will operate properly and perform its intended function.
24. Check for alignment of moving parts, binding or moving parts, breakage of parts, mountings
and other conditions that may affect its operation, Inspect screws and tighten any that are
loose. Any part that is damaged should be properly repaired or replaced by an authorised
service centre unless otherwise indicated elsewhere in the instruction manual. Have defective
switches replaced by an authorised service centre. Don’t use the tool if switch does no turn it
on and off properly.
25. REPLACEMENT PARTS. When servicing, use only identical replacement parts.
26. SERVICE AND REPAIRS should be made by qualified repair technicians at an authorised
repair centre.
27. Improperly tools could cause serious shock or injury.
28. Make sure the grinding wheel is securely mounted as described in the assembly instructions
before connecting the tool to a power supply. Do not tighted excessively, since this can cause
cracks.
29. Check wheel for fissures and cracks and test for normal operation prior to use.
30. Only use grinding wheels recommended by Swarts Tools.
31. Always ease the abrasive wheel against the work piece when starting to grind. A harsh impact
can break the wheel.
32. Always press the trigger switch and allow the grinding wheel to reach full speed before
commencing work.