background image

WARRANTY

SWB1705

01

SPECIFICATIONS

The product is warranted to be free from defects in materials and workmanship under 
normal use and service for a period of 36 months from the date of sale. This warranty 
covers defective parts and workmanship provided that the product is shipped pre-paid 
to the seller within 36 months of purchase of goods. This warranty is limited to the 
repair or replacement (at the manufacturers’ discretion) of parts and shipping prepaid 
to the original dispatch destination. We regret that no liability can be accepted for 
consequential or special damages of any kind howsoever arising in connection with 
products  supplied by the seller. This warranty is in lieu of all other warranties 
expressed or implied. No representative is authorised to assume for the seller any 
other liability in connection with the seller’s products. 

Item number: SWB1705
Rated voltage: 240V - 50Hz
Peak motor input: 350W
Rated input: 230W

Max speed: 3000RPM
Cord length: 1.5m
Warranty: 3 years

    1 x Premium chainsaw sharpener
    2 x 145x22.3x3.2mm grinding wheel

 

    1 x 145x22.3x4.7mm grinding wheel
    2 x Allen key
    1 x Dressing stone

    4 x Mounting bolts
    1 x Chain template
    1 x Handle 
     Assembly hardware
    1 x Instruction manual

CONTENTS OF BOX

Содержание SWB1705















Отзывы: