25
4.12 ADVANCE MENU___NETWORK
4.12 ADVANCE MENU___NETWORK
Move the cursor to “NETWORK”, press ”ENTER”, and the screen will show the
following options.
1)
NETWORK TYPE (STATIC):
Select NETWORK TYPE, press “
＋
” or “
－
” button to set the network type as
STATIC, and then press “ENTER” to go to the submenu of the network. In
the submenu of the network type, use “
＋
” or “
－
” button to set all the
information needed in the DVR. See the illustration below.
2)
NETWORK TYPE (DHCP):
This DHCP function needs to be supported by a router or cable modem network
with DHCP service. For detailed DHCP settings, please refer to P.37 and P.38
(Licensed Software AP).
3)
NETWORK TYPE (PPPoE):
This PPPoE function needs to have “username” and “password” subscribed from
one ISP supplier. For detailed PPPoE settings, please refer to P.37 and P.38
(Licensed Software AP).
NOTE:
DHCP and PPPoE network types need to apply DDNS service to get “Hostname” to
correspond to the dynamic IP address. For detailed DDNS settings, please refer to P.38.
NETWORK
NETWORK
NETWORK TYPE
STATIC
DNS
168. 95. 1. 1
PORT
0 0 8 0
STATIC
STATIC
IP
60. 121. 46. 236
GATEWAY
60. 121. 46. 226
NETMASK
255. 255. 255. 254
