General Information
Installation Procedure
Vanity Top Accessories
Side Splash and Front Apron Panels
Side Splash Panel for Vanity Tops (one per carton)
Model
Dimensions
SVTSS22
21”W x 3H x 3/4”D
Side Splash Panel for Chesapeake (one per carton)
Model
Dimensions
SVTSS22CH
21-5/8W x 3-1/2” x 3/4”D
Front Apron Panel (one per carton)
Model
Dimensions
SVT37FA
37W x8H x 1/2D
SVT55FA
55W x 8H x 1/2D
SVT61FA
61W x 8H x 1/2D
Side Apron Panel (one per carton)
Model
Dimensions
SVT22SA
21”W x 8”H x 1/2”D
Accessible Finish Kit (one per carton)
Model
Dimensions
SVT74SSADA
74”W x 23”H x 211/2”D
Unpack Carton
Use care when opening the box not to damage the sink.
This product is shipped to you after careful inspection.
Carefully unpack and inspect the product for any shipping
damage that may have occurred. If damage is found, report
it immediately. After inspection and during installation,
protect the products from construction damage, by moving
them to another room or area until ready to install.
Please use the model number located on the side of the
box, or the front of this manual, when contacting us with
questions concerning the installation of this unit.
Make sure the sink is the correct size and in good condition.
Installation of damaged product will void the warranty.
Helpful Hints
Read these instructions carefully and familiarize yourself
with the various parts of the sink.
The variety of installations possible for this sink may require
procedures other than those shown. Ensure construction is
correctly sized, plumb, and square.
Allow sufficient time for the parts in this sink to adjust to
room temperature. We do not recommend installation of this
product at temperatures below 65 degrees.
Store unused materials away from the work area to prevent
accidental damage.
Turn off the hot and cold water supply before starting
installation.
Caulking Tips
Follow the instructions on the caulking tube.
When job is complete, inspect all caulked areas for gaps
and fill as needed.
Clean up excess silicone using denatured alcohol and a
clean cloth.
Be very careful not to disturb caulk joints before they dry.
800.443.7269
5
Comfort Designs with Swan Solid Surface
