Installation Procedure
10. Connect the faucet supply lines per the manufacturer’s
instructions.
11. Connect the drain lines and p-trap per the manufacturer’s
instructions.
Note:
It is recommended to use a licensed plumber
for the installation of all necessary plumbing.
12. Turn on the water and check for leaks. Fix any leaks
immediately.
Optional Side Splash Panel Installation
1. Sand back corner of side splash panel to allow flush fitting
to vanity top.
2. Trial fit side splash to vanity top checking for proper fit.
Sand and trim, as needed.
3. Clean the surfaces to be bonded with denatured alcohol,
removing all dust and contaminants. Allow the surfaces to
dry completely.
4. Apply a thin bead of silicone onto back of side splash panel
and attach it to the wall. Wipe off excess adhesive with
denatured alcohol and allow adhesive to set for 24 hours for
maximum adhesion.
VI-010
VI-011
VI-027
VI-015
800.443.7269
9
Comfort Designs with Swan Solid Surface
