Swann NVR-7085 models, Инструкция по эксплуатации

Страница: 47 / 58

47
AD
VANCED
C
ONFIGURA
TION
EN
ADVANCED CONFIGURATION
To maintain the operational integrity of the NVR, it is suggested that it be rebooted periodically. In much the same way that a
computer can become unstable if left on for an extremely long time, the NVR can become unstable. It is strongly suggested that
the NVR be rebooted at least once per week.
However, as this can be a hassle (particularly if the NVR is stashed away somewhere inconvenient) you can set the NVR up to
reboot itself.
Enable auto reboot: Will automatically shut the NVR down and restart it at a certain time of the day or week.
Auto reboot at: Choose when you’d like the NVR to reboot. Typically, this will be a time when it’s unlikely there’ll be any activity
for the NVR to record.
Firmware Upgrade (Upgrade): Instructs the NVR to update its firmware. You’ll only need to use this option if instructed to do so
by Swann Technical Support. (Remember to Export your configuration first so you don’t have to re-set everything!)
Default Settings (Restore): Loads the factory default settings.
This must be done after a firmware upgrade to ensure proper operation of the NVR. You can retain your settings, recording
schedule and so on by using the Import/Export Configuration function before upgrading the firmware.
Configuration (Export): Creates a file containing all the settings you’ve customized, including your recording preferences,
schedule, user-list and so on.
To export your settings:
• Insert a USB flash drive into the USB port on
the back of the NVR. Ensure it has enough free
space (a few MB is sufficient - the file is less
than 50KB) and that it is not write-protected.
• Choose Configuration: Import/Export .
• You’ll see a file browser, showing the contents of
the storage device.
• Click Export to save your settings.
Configuration (Import): Operates in the same way as
the Export function, but is used to load a previously
saved configuration file.
Locate the file you want on your flash drive - it will
be called config(time/date).tgz . Loading the file will
cause the NVR to automatically reboot.
System: Maintenance