U
SER
’
S
M
ANUAL
H.264
R
EAL
T
IME
DVR
39
3)
Event
You can specify the processing when event occurs like sensor, motion detection, video
loss, event filters, and schedule.
①
[Device]
You can set enable or disable sensor, alarm, and alert.
A.
Sensor no.: Select sensor no. (1 ~ 4)
B.
Activate sensor: Check if you want to enable the sensor.
C.
Type : Specify the sensor type is “N.O.” or “N.C.”.
i.
N.O.(Normal Open): The type of input device is opened normally.
ii.
N.C.(Normal Close): The type of output device is closed normally.
D.
Activate alarm: Check if you want to use alarm when event occurs.
E.
Latency time: Setting the duration time of alarm output from event
occurs. (1~10 Sec., OFF)
F.
Activate alert: Setting sound a buzzer when event occurs from input
device. (On/Off)
G.
Latency time: Setting the duration time of buzzer sound from event
occurs. (1~10 Sec., OFF)
①
②
③
④
⑤
⑥
⑦
