27
Click for contents
Device: PTZ
If you have a compatible PTZ camera connected to your DVR, you can
use the PTZ controls to move the camera as well as the ability to zoom
into an object and to control the level of focus (if available). You can cre-
ate multiple preset positions, which can be recalled to focus the cam-
era’s view to a different position. Cruise mode can also be used to move
the camera to different preset positions that have been created.
To configure your PTZ camera, consult the instruction manual included
with your device then match those settings here.
Please note:
Each channel has a unique address assigned to it,
channel 1 is 001, channel 2 is 002, etc. Most PTZ cameras have
their address or ID set to 001, therefore when connecting to a channel
other than channel 1, the channel address will have to be changed to
match the same address used by the camera. For example, if the cam-
era is connected to channel 3, click the drop down menu, select “CH3”
and change the address to 001. Select “CH1” and change the address to
003. Click the “Save” button to apply settings.
For instructions on how to control your PTZ camera and creating preset
positions (see page 28 - Controlling your PTZ Camera).
·
Don’t forget to click “Save”
to apply settings.
·
Use the “Copy” function to
apply all settings to the other
cameras.
·
Click the “Default” button
to revert back to default set-
tings.
·
Click the “Close” button to
exit the Main Menu.
