background image

2

Important Information

FCC Verification

This equipment has been tested and found to comply with the limits for 
Class B digital device, pursuant to part 15 of the FCC Rules. These limits 
are designed to provide reasonable protection against harmful interfer-
ence in a residential installation. This equipment generates, uses and 
can radiate radio frequency energy and, if not installed and used in ac-
cordance with the instructions, may cause harmful interference to radio 
or television reception, which can be determined by turning the equip-
ment off and on, the user is encouraged to try to correct the interference 
by one or more of the following measures:

 

·

Reorient or relocate the receiving antenna

 

·

Increase the separation between the equipment and the receiver

 

·

Connect the equipment into an outlet on a circuit different from that 

to which the receiver is connected

 

·

Consult the dealer or an experienced radio/TV technician for help

These devices comply with part 15 of the FCC Rules. Operation is sub-
ject to the following two conditions:

 

·

These devices may not cause harmful interference

 

·

These devices must accept any interference received, including inter-

ference that may cause undesired operation

Important Notice:

 

All jurisdictions have specific laws and regulations 

relating to the use of cameras. Before using any camera for any pur-
pose, it is the buyer’s responsibility to be aware of all applicable laws 
and regulations that prohibit or limit the use of cameras and to comply 
with the applicable laws and regulations.

FCC Regulation (for USA): Prohibition against eavesdropping

Except for the operations of law enforcement officers conducted under 
lawful authority, no person shall use, either directly or indirectly, a de-
vice operated pursuant to the provisions of this Part for the purpose 
of overhearing or recording the private conversations of others unless 
such use is authorized by all of the parties engaging in the conversation.

Warning:

 

Changes or modifications made to this device not approved 

expressly by the party responsible for compliance could void the user’s 
authority to operate the equipment.

Important Safety Instructions

 

·

Do not operate if wires and terminals are exposed

 

·

Do not cover vents on the side of your device and allow adequate space 

for ventilation

 

·

Only use the power adapter supplied with your DVR

About this Instruction Manual

This instruction manual is written for the DVR-1590, DVR-1600 and 
DVR-4575 series and was accurate at the time it was completed. Howev-
er, because of our on-going efforts to constantly improve our products, 
additional features and functions may have been added since that time.

Important Password Information

This DVR does not have a default password. A password is created 
during the Startup Wizard. If password protection has been enabled 
and you have forgotten your password, your DVR’s MAC address can 
be used to create a new password (see page 3 - Password Recovery).

Содержание DVR-1590 Series









































































Отзывы: