24 of 34
Service Manual UK
Indesit
Company
English
COMPONENTS
Door
The door is constructed of several components, the outer
shell being powder coated metal.
And an inner lining consists of a moulding that clips into
position on the outer door shell.
The hinges are reversible, the extra holes on the opposite
side of the front panel being filled with blanking plugs. The
blanks need removal before changing the hinge side that
can be completed by diagonally transposing the hinges.
Filter
Comprises of a plastic mesh moulded into its housing,
which slides into the front air duct.
Door Switch
Normally open single pole microswitch activated by the
door on closure. This is the first switch in the electrical
circuit and therefore its rating, corresponds to the full loading of the product.
Control Module
This is an Electronic Device that monitors and controls all devices within the tumble dryer.
A production module is pre programmed at the factory with the relevant programmed file.
Service Modules are supplied non programmed and it is necessary for the Module to be programmed
by the Service Engineer. See pages 27 - 28 for Module programming.
Drum
The drum comprises of a zinc coated front and rear body and two
removable plastic lifters. The rear of the drum is perforated to allow
the passage of air. Fixed to the rear pressing is a support shaft which
runs in a bearing located in the rear panel of the dryer.
A drive pin and collar on the drum shaft prevents forward thrust
during use. The front lock seam of the drum rotates on front drum
support wheels.
Rear Thermistor
Fitted to the heater assembly above the heater.
Used by the electronics for controlling the temperature into the rear of the dryer.
Front Thermistor
Fitted to the bottom of the front air duct moulding, used by the electronics for controlling the
temperature.
One-Shot (Safety) Thermostat (White Spot)
The drum has a patterned finish to allow
for better air circulation within the drum.
Curved Drum paddles give extra garment
care.
Water
container
Condenser
cover handle
(pull to open)
Filter
Air intake
grille
Model &
Serial
Numbers
Rating plate
Patterned drum from a model fitted
with a stainless steel drum
