21 of 34
Indesit
Company
Service Manual UK
English
USING THE DRYER
1.
Load the Dryer with Laundry
2.
Turn the Power On to the Dryer
3.
Turn the Selector Knob to the required Programme - this will turn the Dryer On and select the
programme in one action.
4.
Set any required options - if available
5.
Push the Start/Pause Button to begin the programme.
Note:
Turning the programme knob to another programme after the cycle has started will NOT change
the cycle to the new programme. You must cancel it first.
Cancelling a Programme
To cancel a programme turn the selector knob to the OFF position and wait until it ends.
Then you can select another programme.
Automatic pre-post Crease Care
This is an automatic function which provides an anti-crease treatment both before and after the
drying programme.
By periodically rotating the drum before the start of the drying cycle, when a delayed start is
selected, the formation of creases is prevented.
On certain programmes the drum also rotates periodically at the end of the drying cycle.
The phase is stopped when the door is opened or when the knob is set to OFF.
