48
A-96.250.611 / 120617
AMI INSPECTOR Conductivity
Program List and Explanations
3 Maintenance
3.1 Calibration
Follow the commands on the screen. Save the value with the [En-
ter] key.
3.2 Simulation
To simulate a value or a relay state, select the
alarm relay,
relay 1 and 2
signal output 3 (signal outputs 1 and 2 are deactivated)
with the [
] or [
] key.
Press the [Enter] key.
Change the value or state of the selected item with the [
] or
[
] key.
Press the [Enter] key.
The value is simulated by the relay/signal output.
At the absence of any key activities, the instrument will switch back
to normal mode after 20 min. If you quit the menu, all simulated val-
ues will be reset.
3.3 Set Time
Adjust date and time.
3.4 Quality Assurance
3.4.5
Follow the commands on the screen. Save the value with the
[Enter] key.
3.2.1
3.2.2
3.2.3
3.2.4
Alarm Relay:
Relay 1:
Relay 2
Signal Output 3
Active or inactive.
Active or inactive.
Active or inactive.
Actual current in mA (if option is installed)
