11
Section 4
CHARGING
Charge the Swagger 5 before using it.
The charge cycle is complete when the battery indicator on display is full. Each charge cycle from zero to full charge will take
approximately 3.5 hrs. When the backlit display on the handlebars indicates that battery power is low, recharge the Swagger 5.
To recharge the Swagger 5, use the included charger.
Step 1.
Make sure the scooter is powered off then locate the charging port under the deck.
Step 2.
Insert the appropriate end into the charging port and then insert the other end into an outlet.
Step 3.
While the scooter is charging, the charger light will turn red.
Step 4.
When the scooter is fully recharged, the charger light will turn green. You may then disconnect the scooter from
the charger.
DO NOT, under any circumstances, use the scooter while it is charging or connected to the charger.
The charging time is approximately 3.5 hours. Charging longer than that may affect battery life and/or
performance. If the charger’s light doesn’t turn on, it may not be fully connected. Check that it is securely
connected to the wall and to the scooter.
