13
5.1 How to Ride
Assuming you have equipped suitable protective gear and that the Swagger 5 has been placed on a level surface, is charged,
and does not have any issues, follow the steps below. For your safety, please read this entire section before attempting to ride.
•
Start your scooter by pressing and holding the power button for 3~5 seconds.
•
Moving forward with your scooter is as easy as pressing the throttle.
•
Cruising is as simple as maintaining speed for at
least 5 seconds.
•
Use the bell to alert pedestrians and other riders of
your presence.
•
Turn the headlight on/off by quick-pressing the
power button twice.
•
Switch gears between 1, 2, and 3 by quick-pressing
the power button once. Each gear has different
speed. Gear 1’s max. is 5 mph, Gear 2’s is 10 mph,
and Gear 3’s is 18 mph.
•
The display shows how much battery power is left.
•
To slow down, gradually ease off the throttle and
apply pressure to the brake.
•
To stop, apply full pressure to the brake until the
scooter stops completely.
1. Handles
2. Brake
3. Bell
4. Headlight
5. Display
6. Power Button
7. Throttle
8. Pairing Indicator
• When the headlight is turned on, the taillight will
also blink for increased visibility.
• Gear speeds are approximate. Actual speed
may vary due to terrain, rider weight, and/or
other factors.
1
2
3
4
5
7
6
8
