SWAGTRON SWAGGER 5 USER MANUAL 10
Step 2.
Pull the stem up away from the deck.
Step 3.
Fold the latch up towards the stem and turn the collar clockwise to lock it.
Before moving, lifting, or otherwise transporting the scooter, ensure it is turned off.
3.4 Tire Inflation
You will need a pressure gauge, a standard bicycle pump, and the included valve extender to inflate the
Swagger 5’s tires.
Step 1.
Ensure the scooter is powered off and stable, so it doesn’t move during inflation.
Step 2.
Visually inspect the tires for damage, scuff, or puncture marks. If the tire is damaged, DO NOT INFLATE IT.
Contact customer service immediately.
Step 3.
Find the valve located on the inside of the wheel and remove the cap.
Step 4.
Use a standard bicycle pump to pump air to the tire slowly.
Step 5.
Use the pressure gauge periodically to check PSI.
Step 6.
When the tire reaches 28 PSI / 1.9 BAR, stop inflating and replace the valve cap.
Step 7.
Repeat with the other tire.
•
Any PSI marking on the tires themselves indicates a maximum. DO NOT inflate the tires to this value, only
inflate them to 28 PSI as directed above.
•
As with all air-filled tires, underinflation is strongly recommended if you intend to ride outdoors in
temperatures above 90°F degrees. Bring the Swagger 5 indoors and deflate the tires to 25.2 PSI. If the
PSI is too high and the tires are exposed to excessively high temperatures, riding outdoors may cause
serious damage to the tire including but not limited to stretching and/or rupturing.
