Swagelok TF16, Руководство пользователя, Страница: 4 / 24

4 Tube Facing Tool User’s Manual
Safety Safety
Safety Information
•
Read the entire safety information section
and Tube Facing Tool User’s Manual before
using this product Failure to do so can result
in serious injury or death
Signal Words and Safety Alert Symbols
Used in this Manual
WARNING Statements that indicate a hazardous
situation which, if not avoided, could result
in death or serious injury.
CAUTION Statements that indicate a hazardous
situation which, if not avoided, could result
in minor or moderate injury.
NOTICE Statements that indicate a hazardous
situation which, if not avoided, could result
in damage to the equipment or other
property.
•
Safety alert symbol indicating a potential
personal injury hazard.
•
Safety alert symbol indicating a potential for
personal injury from electrical shock.
•
WARNING
Danger of death by electric shock
■
If the power cord is damaged, electrically live
parts may cause death if touched directly.
■
Do not allow the tool to run unattended.
■
The tool should be connected to a ground
fault current interrupt (GFCI) protected outlet.
■
Read through the operating instructions and
safety information completely before using
the rechargeable battery and charger of
the TF16 series, TF24 series, or TF48 series
cordless models.
■
Work on electrical equipment must be done
by a qualified electrician.
■
Switch off the tool, allow it to run until it stops
rotating and remove the plug from the power
outlet or take out the rechargeable battery
before changing tooling, maintaining, or
transporting the tool.
•
WARNING
Danger of eyes being injured by hot and
sharp-edged metal chips
Eye protection must be worn while operating or
working near the equipment.
WARNING
Keep dry Equipment and components are
not waterproof
Do not use electric tools and rechargeable
batteries in a damp or wet environment.
•
WARNING
Fire or Explosion
Do not use in close proximity to flammable
liquids or gases.
WARNING
Danger of being injured by rotating parts
Keep hands, loose clothing, and long hair away
from rotating and moving parts.
•
WARNING
Danger of being injured by sharp cutting
edges
■
Do not touch the cutting insert while the tool
is operating.
■
Wear safety gloves.
■
Do not remove chips or tubing from the work
area when the tube facing tool is still running
and the tool is not yet at rest.
■
Wear safety gloves to remove chips. Remove
long and bent chips with needle-nose pliers.