Swagelok TF16, Руководство пользователя, Страница: 14 / 24

14 Tube Facing Tool User’s Manual
Fitting the TF Cutting Bit (MS-TF-BIT) and the
Tool Holder
•
WARNING
Flying hot and sharp-edged chips, tube surfaces, cutting
edges and tools
■
Do not reach into the rotating tool during working.
■
Never work without an installed cover hood or protection.
■
Wear recommended protective clothing.
■
Before transportation or changing the workplace, switch
off the machine, wait until the machine/tool stops running
and pull the main plug. Remove chips with tight fitting
safety gloves (in accordance with DIN EN 388 and EN 407)
using suitable tools (tongs or screwdrivers.
■
Ensure that the cover hood or protection is functional.
•
WARNING
The MS-TF-BIT multifunctional tool may be damaged by
wrong inserting of a tube Damage to tool
■
Before clamping the tube, ensure sufficient distance
between the MS-TF-BIT and the tube.
1. Screw the TF cutting bit (MS-TF-BIT) onto the tool holder using a
Torx screwdriver, Fig. 17.
2. Insert the tool holder with fitted MS-TF-BIT laterally into the
guiding groove and position it, Fig. 18.
3. Press the tool holder against the bearing surface of the tool
support and, at the same time, tighten the screw using the Allan
key (1).
4. Remove the hexagon key (1) from working area.
NOTICE
To make the setting procedure easier for the TF48 machine,
there are 3 visual markings for the 1, 2, and 3 in pipes,
Fig. 17 Screw MS-TF-BIT
onto Tool Holder
Fig. 18 Insert Tool Holder
laterally
Fig. 19 Markings for 1, 2, and 3 in.