Swagelok TF16, Руководство пользователя, Страница: 18 / 24

18 Tube Facing Tool User’s Manual
Adjusting the Speed: Cordless Models
The speed level is factory set in cordless models. See the table
on the previous page for speed range information.
The speed range can be adjusted with the ON-OFF
switch/speed control.
■
Depress the ON-OFF switch/speed control to increase the
speed.
■
Gradually release the pressure on the ON-OFF switch/speed
control to decrease the speed.
Fig 27 ON-OFF Switch/Speed Control
ON-OFF switch/
speed control
Shutting Down (even in an emergency)
•
WARNING
Emergency stop function not available by unplugging
the power plug Diverse physical injuries and
material damage
■
Do not use angled power plugs.
■
Do not use click-in socket outlets and click-in power
plugs (blue CEE power plugs) for power connection,
otherwise the emergency stop does not function.
The user must check whether the power plug can be
pulled out of the outlet by the cable.
■
Only use original Swagelok tool parts.
■
Ensure free access to the power plug.
To be able to stop the machine (also in case of emergency),
perform the corresponding steps and immediately remove from
the danger are, until the machine comes to a stop.
■
If the locking button is not activated release the ON-
OFF switch (also for battery).
■
If the locking button is activated press and release
the ON-OFF switch (not for battery).
■
If the ON-OFF switch does not function unplug the
power plug, or leave the danger zone as quickly as
possible and then unplug the power plug.
Setting the cutting speed
■
Set adjusting wheel to variable speed selection at
desired level (Figure 28 and 29). "I" corresponds
to the lowest and "7" to the highest number of
revolutions.
Switching the Machine On
■
Connect the TF series
■
Ensure the tube has a solid footing.
■
Press the ON-OFF switch.
•
WARNING
Do not use the locking button as this hampers
shutdown
•
WARNING
If the tool vibrates after starting up, the cutting speed
is too high and reduce cutting speed
Fig 28 Adjusting wheel (electric)
Fig 29 Adjusting wheel (battery)