Swagelok TC72 series, Руководство пользователя

Страница: 7 / 22

Tube Cutting Tool User’s Manual 7
WARNING
Observe the following safety measures in order to
protect against risk of injury
■
Inspect the tube cutting tool daily for visible
signs of damage or defects. Have any damage or
defects repaired immediately.
■
Always ensure that the machine is in good working
order and comply with these notes on safety.
■
Only use the tube ODs, wall thicknesses, and
materials specified in these instructions. Other
materials should be used only after consulting
your authorized Swagelok sales and service
representative.
■
Check that the tube is correctly clamped.
■
Do not carry the tube cutting tool by the power
cord and do not use the cord to pull out the plug.
Protect the cord from heat, oil and sharp edges
(chips).
■
Before cutting tubing, ensure that the saw blade
guard is attached.
■
Do not have saw blades in both sawing positions
at the same time.
■
Ensure that the cut piece of tube will not fall.
■
When work is complete, turn the tool off and let it
run until the blade stops rotating.
Environmental Protection/Disposal
■
Dispose of chips and used gear lubricant oil according to
local regulations.
Electric tools and accessories contain a large share of valuable
raw and synthetic materials, which can be recycled. Therefore:
■
Electrical (electronic) devices that are marked with the
symbol in Fig. 1, may not be disposed of with household
waste in accordance with European Union (EU) regulations.
■
By using local return and collection systems, you contribute
to the reuse, recycling and utilization of electrical (electronic)
devices.
■
Electrical (electronic) used devices contain parts, which
must be handled selectively according to EU regulations.
Separate collection and selective treatment is the basis for
environment-friendly disposal and the protection of human
health.
■
Batteries that are marked with the symbol in Fig. 2 may not
be disposed of with household garbage according to EU
directive 91/157/EEA.
■
In batteries containing harmful substances, the chemical
sign for the heavy metal contained is indicated below the
garbage can:
Cd = Cadmium Hg = Mercury Pb = Lead
Fig. 1 RL 2002/96/EC Symbol
Fig. 2 Battery Symbol