Swagelok TC72 series, Руководство пользователя

Страница: 15 / 22

Tube Cutting Tool User’s Manual 15
3. Remove the saw blade nut with the provided 22 mm wrench
(Fig. 16).
Note: The saw blade nut is a reverse-threaded nut.
4. Clean the saw blade shaft and the surrounding area with a
brush.
5. Mount the saw blade on the shaft with the marking on the
blade facing the clamping plate (Fig. 17).
6. Thread the saw blade nut onto the shaft and tighten
wrench-tight with the provided wrench.
Saw Blade Position 2
1. Remove the clamping screw cover (Fig. 18).
2. Loosen the clamping screw using the provided 8 mm hex
key.
3. Clean the saw blade shaft and the surrounding area with a
brush.
4. Mount the saw blade on the shaft with the marking on the
blade facing the saw blade guard.
5. Tighten the clamping screw using the provided hex key
(Fig. 19).
6. Replace the clamping screw cover.
Saw blade nut
Fig 16 Saw Blade Position 1
Fig 18 Clamping Screw Cover
Clamping screw
cover
Clamping screw Saw blade
guard
Fig 19 Saw Blade Position 2
Fig 17 Clamping Plate
Clamping plate